30A02SP no.7361-1/4 pnp epitaxial planar silicon transistor applications ? low-frequency amplifer, high-speed switching, small motor drive. features ? large current capacitance. ? low collector-to-emitter saturation voltage (resistance). r ce (sat) typ=580 w [i c =0.7a, i b =35ma]. ? small on-resistance (ron). specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo --30 v collector-to-emitter voltage v ceo --30 v emitter-to-base voltage v ebo -- 5 v collector current i c --700 ma collector current (pulse) i cp --1.4 a collector dissipation p c 400 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =--30v, i e =0 --100 na emitter cutoff current i ebo v eb =--4v, i c =0 --100 na dc current gain h fe v ce =--2v, i c =--10ma 200 500 gain-bandwidth product f t v ce =--10v, i c =--50ma 520 mhz marking : xm continued on next page. ordering number : enn7361a 30A02SP 91003 ts im ta-100699 / 32603 ts im ta-100380 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. low-frequency general-purpose amplifier applications package dimensions unit : mm 2033a [30A02SP] sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan 1 : emitter 2 : collector 3 : base sanyo : spa 4.0 0.4 0.5 0.4 0.6 15.0 3.0 1.8 123 2.2 0.4 1.3 1.3 3.0 3.8nom 0.7 0.7
30A02SP no.7361-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit output capacitance cob v cb =--10v, f=1mhz 4.7 pf collector-to-emitter saturation voltage v ce (sat) i c =--200ma, i b =--10ma --110 --220 mv base-to-emitter saturation voltage v be (sat) i c =--200ma, i b =--10ma --0.9 --1.2 v collector-to-base breakdown voltage v (br)cbo i c =--10 m a, i e =0 --30 v collector-to-emitter breakdown voltage v (br)ceo i c =--1ma, r be = --30 v emitter-to-base breakdown voltage v (br)ebo i e =--10 m a, i c =0 --5 v turn-on delay time t on see specified test circuit. 35 ns rise time t stg see specified test circuit. 125 ns turn-off delay time t f see specified test circuit. 25 ns switching time test circuit v r r b v cc = --12v v be =5v ++ 50 input output r l 220 f 470 f pw=20 s i b1 d.c. 1% i b2 i c =20i b1 = --20i b2 = --300ma 0 0 --200 --100 i c -- v ce it05049 it05051 it05050 --400 --300 --600 --500 --700 --200 --600 --400 --800 --1000 --100 --500 --300 --700 --900 0 0 i c -- v be --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --200 --800 --500 --700 --400 --300 --600 --100 3 100 h fe -- i c --1.0 2 3 5 7 --10 2 3 5 7 2 3 5 7 --100 --1000 2 3 5 1000 7 5 7 i b =0 ta=75 c 25 c --25 c --500 a --1ma --2ma --5ma --3ma --7ma --10ma --15ma --40ma --50ma --30ma --20ma --25ma v ce = --2v v ce = --2v ta=75 c 25 c --25 c it05054 --1.0 v ce (sat) -- i c 23 57 --10 23 57 23 57 --100 --1000 --1000 --100 2 3 5 7 2 3 5 7 --10 ta=75 c --25 c 25 c i c / i b =20 collector-to-emitter voltage, v ce -- mv collector current, i c -- ma base-to-emitter voltage, v be -- v collector current, i c -- ma collector current, i c -- ma dc current gain, h fe collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv
30A02SP no.7361-3/4 it05053 --1.0 0.1 cob -- v cb --10 2 3 5 7 2 3 5 2 3 5 7 10 2 5 7 f=1mhz it05055 v ce (sat) -- i c --1.0 23 57 --10 23 57 23 57 --100 --1000 it05056 v be (sat) -- i c 3 --1.0 2 5 7 3 --10 --0.1 ta= --25 c 75 c 25 c --1.0 23 57 --10 23 57 23 57 --100 --1000 --10 3 --1000 2 2 3 5 7 2 3 5 7 --100 ta=75 c --25 c 25 c it05052 --1.0 f t -- i c 23 57 23 57 23 57 --10 --100 --1000 100 1000 5 7 2 3 v ce = --10v i c / i b =50 i c / i b =20 collector current, i c -- ma gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- mv collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- v collector dissipation, p c -- mw ambient temperature, ta -- c p c -- ta 0 0 100 it05048 200 400 300 500 40 20 100 120 60 80 140 160 f=1mhz --0.1 0.1 ron -- i b it06403 7 5 3 2 10 7 5 3 2 7 5 3 2 1.0 100 3 2 57 3 2 57 --1.0 --10 out in 1k 1k i b base current, i b -- ma on resistance, ron --
30A02SP no.7361-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of september 2003. specifications and information herein are subject to change without notice. ps
|
